Lamp Replacement For the 331 and 341

Customers may need to know the part numbers and/or how to change the lamp in a 331 or 341

A spare Lamp Assembly for the 331 and 341 can be obtained from X-Rite, Inc. Replace with the following parts:

P/N: 331-29 Lamp Assembly for 331 units with serial numbers below 100000

P/N: 331-129 Lamp Assembly for 331 units with serial numbers above 100000

P/N 341-37 Lamp Assembly for 341

Lamp Replacement Procedure:

1、Remove the bottom cover from the instrument by removing the four screws from the bottom cover shown in the image below

2、Unplug the lamp connector from the Printed Circuit Board (PCB) assembly by gently pulling in the direction shown by the arrow below

3、Remove the two screws holding the lamp assembly in place as indicated by the arrows in the image below and remove the lamp assembly

4、Fasten the new lamp into the lamp chamber assembly with the screws removed in Step 3

CAUTION: Make sure the new lamp surface is clean. Remove smudges or contamination with alcohol and a lint-free cloth

5、Plug the lamp connector into the respective receptacle on the PCB assembly

上海備得數碼科技有限公司作x-rite愛色麗專業的銷售與服務商，可提供愛色麗分光測色儀、色彩管理軟件、標準光源以及相關配件耗材，同時提供產品技術支持、使用培訓、維修校正等售后服務，如有相關需求歡迎隨時聯系我們！

相關產品鏈接：341C便攜式透射密度儀

如需了解更多x-rite愛色麗產品，歡迎訪問http://www.buenofashion.com/xrite